Connector - SCSI-III External Hi D-Sub (Differential)SCA=Single Connector AttachmentDrive connector: AMP Champ 557613-1 or AMP Champ 557114-5
Cable connector: AMP Champ 2-557103-1 or AMP Champ 2-557101-1
| Pin | Name | Direction | Description |
|---|
| 1 | 12V | --- | +12 VDC | | 2 | 12V | --- | +12 VDC | | 3 | 12V | --- | +12 VDC | | 4 | 12V | --- | +12 VDC | | 5 | 3.3V | --- | +3.3 VDC | | 6 | 3.3V | --- | +3.3 VDC | | 7 | -DB(11) | --- | Data Bus 11 | | 8 | -DB(10) | --- | Data Bus 10 | | 9 | -DB(9) | --- | Data Bus 9 | | 10 | -DB(8) | --- | Data Bus 8 | | 11 | -I/O | Output | Input/Output | | 12 | -REQ | Output | Request | | 13 | -C/D | Output | Control/Data | | 14 | -SEL | --- | Select | | 15 | -MSG | Output | Message | | 16 | -RST | --- | Reset | | 17 | -ACK | Input | Acknowledge | | 18 | -BSY | --- | Busy | | 19 | -ATN | Input | Attention | | 20 | -P_CRCA | | | | 21 | -DB(7) | --- | Data Bus 7 | | 22 | -DB(6) | --- | Data Bus 6 | | 23 | -DB(5) | --- | Data Bus 5 | | 24 | -DB(4) | --- | Data Bus 4 | | 25 | -DB(3) | --- | Data Bus 3 | | 26 | -DB(2) | --- | Data Bus 2 | | 27 | -DB(1) | --- | Data Bus 1 | | 28 | -DB(0) | --- | Data Bus 0 | | 29 | -DB(P1) | | | | 30 | -DB(15) | --- | Data Bus 15 | | 31 | -DB(14) | --- | Data Bus 14 | | 32 | -DB(13) | --- | Data Bus 13 | | 33 | -DB(12) | --- | Data Bus 12 | | 34 | 5V | --- | Ground (Signal) | | 35 | 5V | --- | Ground (Signal) | | 36 | 5V CHARGE | --- | Ground (Signal) | | 37 | SPINDLE SYNC | | Spindle Sync | | 38 | RMT_START | | Remote Start | | 39 | SCSI ID (0) | --- | SCSI ID Bit 0 | | 40 | SCSI ID (2) | --- | SCSI ID Bit 2 | | 41 | 12V GROUND | --- | +12 VDC Ground | | 42 | 12V GROUND | --- | +12 VDC Ground | | 43 | 12V GROUND | --- | +12 VDC Ground | | 44 | MATED 1 | | | | 45 | 3.3V CHARGE | --- | +3.3 VDC Charge | | 46 | DIFFSNS | --- | Differential Sense | | 47 | +DB(11) | --- | Data Bus 11 | | 48 | +DB(10) | --- | Data Bus 10 | | 49 | +DB(9) | --- | Data Bus 9 | | 50 | +DB(8) | --- | Data Bus 8 | | 51 | +I/O | Output | Input/Output | | 52 | +REQ | Output | Request | | 53 | +C/D | Output | Control/Data | | 54 | +SEL | --- | Select | | 55 | +MSG | Output | Message | | 56 | +RST | --- | Reset | | 57 | +ACK | Input | Acknowledge | | 58 | +BSY | --- | Busy | | 59 | +ATN | Input | Attention | | 60 | +P_CRCA | | | | 61 | +DB(7) | --- | Data Bus 7 | | 62 | +DB(6) | --- | Data Bus 6 | | 63 | +DB(5) | --- | Data Bus 5 | | 64 | +DB(4) | --- | Data Bus 4 | | 65 | +DB(3) | --- | Data Bus 3 | | 66 | +DB(2) | --- | Data Bus 2 | | 67 | +DB(1) | --- | Data Bus 1 | | 68 | +DB(0) | --- | Data Bus 0 | | 69 | +DB(P1) | | | | 70 | +DB(15) | --- | Data Bus 15 | | 71 | +DB(14) | --- | Data Bus 14 | | 72 | +DB(13) | --- | Data Bus 13 | | 73 | +DB(12) | --- | Data Bus 12 | | 74 | MATED 2 | | | | 75 | 5V GROUND | --- | +5 VDC Ground | | 76 | 5V GROUND | --- | +5 VDC Ground | | 77 | ACTIVE LED OUT | | | | 78 | DLYD_START | | | | 79 | SCSI ID (1) | --- | SCSI ID Bit 1 | | 80 | SCSI ID (3) | --- | SCSI ID Bit 3 |
5: RESERVED/NC6: RESERVED/NC20: -DB(P0)36: 5 VOLT44: 12 V GROUND45: RESERVED/NC46: RESERVED/NC74: 5 V GROUND Note: Direction is Device relative Bus (other Devices).
| 
